8000 Series Specifications:
·Material – Push bar painted heavy gauge steel, spring of stainless steel.
·Latch Bolts – 3/4″ throw, stainless steel.
·Dead Latch Bolt – 5/8″ stainless steel.
·Strike – For 5/8″ stop, plus shim for 1/2″ stop.
·Projection – 2-1/2″ maximum, 1-7/8″ depressed
·Reversible – Non-handed. Reversible for all functions and trims.
·For Door – 1-3/4″ thick standard. Specify if other than 1-3/4″ thick.
·Backset – 2-3/4″.
·161 Cut Out – Device covers 161 cu out. Some trims require cover plate.
·Sex Bolts – Standard packaging for use with wood, composite or non reinforced doors on vertical rod devices.
·Door Width – For door 2`6″ to 3`0″ wide – 3`0″ standard; for door 3`0″ to 4`0″ wide – 4`0″ standard
·Stile Height – 4-1/4″ min.
·Mounting Height – 40-5/16″ from CL to finished floor recommended.
·Mounting – Furnished standard with sheet metal & machine screws.
·Cylinder – Schlage “C” keyway, other keyways specify.
·Dogging – 1/4 turn, hex key dogging on non-fire-labeled devices.
·U.L. Listed – For panic hardware
·Operation – Inside by slight pressure on any point on the push bar at all times.
·Top Latchbolt – 3/4″ throw, stainless steel.
·Top Deadbolt – 1/2″ throw, steel bolt.
·Bottom Latchbolt – 3/4″ throw, stainless steel.
·Door Height – For door up to 7`0″ high – 7`0″ standard. For door up to 7`0″ to 8`0″ – 8`0″ standard.